EK/PBR Chain kit 520 ZVX3 - 15/46-116 - Steel Standard Rear Sprocket for KTM ENDURO 690 and GAS GAS ES 700 2014-2027

EK CHAIN offers this chain and sprocket kit for KTM ENDURO 690 and GAS GAS ES 700 2014-2027. The front sprocket, on the gearbox output, drives the chain, which turns the rear sprocket bolted to the rear wheel.

Why replace the whole kit?

The benefits:

• A worn chain damages the teeth and worn teeth damage the chain: replacing all three parts together avoids ruining a new part within a few rides.
• Pitch, tooth counts and chain length are already matched: one order for the whole final drive.
• You can adapt the gearing: more teeth on the rear sprocket (or fewer on the front) gives more acceleration but less top speed; fewer teeth on the rear does the opposite.

When should you replace this part?

Hooked or pointed teeth, a chain that lifts off the back of the rear sprocket when pulled, tight spots or slack that needs adjusting every ride: the kit is worn out.

Specifications and fitting tips

• Front sprocket version: Standard
• Rear sprocket version: Reinforced
• Use: Road
• Connecting link: Pin rivet
• EK Chain Type: ZVX3
• Manufacturer part number: 3071426

Cross-Mania tip: Align the rear wheel (same marks on both sides), tighten the rear sprocket bolts to the specified torque with threadlocker, set the slack to the manual and recheck it after the first ride.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
GAS GAS ES 700 2026
GAS GAS ES 700 2025
GAS GAS ES 700 2024
GAS GAS ES 700 2023
GAS GAS ES 700 2022
KTM ENDURO 690 2027
KTM ENDURO 690 2026
KTM ENDURO 690 2025
KTM ENDURO 690 2024
KTM ENDURO 690 2023
KTM ENDURO 690 2022
KTM ENDURO 690 2021
KTM ENDURO 690 2020
KTM ENDURO 690 2019
KTM ENDURO 690 2018
KTM ENDURO 690 2017
KTM ENDURO 690 2016
KTM ENDURO 690 2015
KTM ENDURO 690 2014