RACETECH Chain Roller Ø31 mm

The RACETECH chain roller. The roller guides the chain and limits chain slap, on the frame or the swingarm depending on the bike. It turns with the chain instead of rubbing, which cuts down on wear and noise.

Specifications

• Brand: RACETECH
• Manufacturer part numbers: R-RSUNINR0831, R-RSUNIBL0831, R-RSUNIRS0831
• Inner diameter: 8 mm
• Outer diameter: 31 mm
• Available versions: Black: ref. R-RSUNINR0831; Blue: ref. R-RSUNIBL0831; Red: ref. R-RSUNIRS0831

Choosing the colour

Check the dimensions first (outside diameter, width, axle diameter): after that, the colour is a styling choice.

When to replace it?

• Roller grooved, oval or cracked.
• Seized bearing: the roller no longer turns.

Check it every time you service the chain: a seized roller gets grooved very quickly and wears the chain.

Fitting tips

1. Compare the new roller with the old one: diameter, width and axle must match.
2. Fit it with its spacers in the same order and tighten the axle bolt to the manufacturer's torque.
3. Check that it turns freely and that the chain runs through the centre.

Why RACETECH?

Racetech, now also sold under the Rtech name, is an Italian brand launched in 2002 by Cristian Mittone, a former professional enduro rider, and based in Premariacco, near Udine. Its catalogue runs to more than 5,000 parts in plastic, aluminium and rubber, from plastic kits to handguards and chain guides.

Spare parts and items to plan

• Drive chain : see the selection

Compatibility

Universal part: check the dimensions given before ordering.