ALL BALLS Choke Plunger Kit for SUZUKI LT-A 400 EIGER AUTOMATIC 4WD, LT-A 400 KINGQUAD ASI 4WD, LT-F 400 EIGER 2WD 2002-2010

ALL BALLS offers this carburettor adjusting screw for SUZUKI LT-A 400 EIGER AUTOMATIC 4WD, LT-A 400 KINGQUAD ASI 4WD, LT-F 400 EIGER 2WD, LT-F 400 KINGQUAD FSI 2WD, LT-F 400 KINGQUAD FSI 4WD 2002-2010. The carburettor meters the air-fuel mixture. The fuel (mixture) screw and the idle screw let you adjust the mixture and the idle speed.

Why fit these adjusting screws?

The benefits:

• Adjust the carburation trackside in seconds.
• Adapt the setting to the day’s altitude and temperature.
• Anodised aluminium knob, easy to see and turn.

Why choose ALL BALLS?

Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.

When should you replace this part?

A mixture that is too lean makes the engine run hot and can seize it.

Specifications and fitting tips

• Manufacturer part number: 46-1025

Cross-Mania tip: Note the number of turns of the original screw before removing it and start again from that setting.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
SUZUKI LT-A 400 EIGER AUTOMATIC 4WD 2007
SUZUKI LT-A 400 EIGER AUTOMATIC 4WD 2006
SUZUKI LT-A 400 EIGER AUTOMATIC 4WD 2005
SUZUKI LT-A 400 EIGER AUTOMATIC 4WD 2004
SUZUKI LT-A 400 EIGER AUTOMATIC 4WD 2003
SUZUKI LT-A 400 EIGER AUTOMATIC 4WD 2002
SUZUKI LT-A 400 KINGQUAD ASI 4WD 2010
SUZUKI LT-A 400 KINGQUAD ASI 4WD 2009
SUZUKI LT-A 400 KINGQUAD ASI 4WD 2008
SUZUKI LT-F 400 EIGER 2WD 2007
SUZUKI LT-F 400 EIGER 2WD 2006
SUZUKI LT-F 400 EIGER 2WD 2005
SUZUKI LT-F 400 EIGER 2WD 2004
SUZUKI LT-F 400 EIGER 2WD 2003
SUZUKI LT-F 400 EIGER 2WD 2002
SUZUKI LT-F 400 KINGQUAD FSI 2WD 2008
SUZUKI LT-F 400 KINGQUAD FSI 4WD 2010
SUZUKI LT-F 400 KINGQUAD FSI 4WD 2009
SUZUKI LT-F 400 KINGQUAD FSI 4WD 2008