HOT CAMS offers you this camshaft stage 1 to equip your motocross HONDA XR 600cc, HONDA XR 650xx. This camshaft has the same place and the same timing as the original one. However, the opening times have been changed to increase the performance of your motocross. During our dyno test we noticed that the engine had much more torque at start up and a much better mid-range recovery. It can be mounted on an original cylinder but also the BIG BORE kit like the ATHENA for example. Ideal to increase quickly and easily the performance of your motocross. Contractual photo to come

Here are the technical data of these camshafts:

Exhaust duration (degrees at 1mm): 258°

Exhaust valve clearance (mm): 0.200mm

Exhaust cam lobe lift: 8.800mm

Intake cam lobe lift: 8.800mm

Intake duration (degrees at 1mm): 258

Intake valve clearance (mm): 0.150mm

Fits on:

HONDA XR 600 R (PE04) 600 1998

HONDA XR 600 R (PE04) 600 1997

HONDA XR 600 R (PE04) 600 1996

HONDA XR 600 R (PE04) 600 1995

HONDA XR 600 R (PE04) 600 1994

HONDA XR 600 R (PE04) 600 1993

HONDA XR 600 R (PE04) 600 1992

HONDA XR 600 R (PE04) 600 1991

HONDA XR 600 R (PE04) 600 1990

HONDA XR 600 R (PE04) 600 1989

HONDA XR 600 R (PE04) 600 1988

HONDA XR 650 L (RD06) 650 2000

HONDA XR 650 L (RD06) 650 1999

HONDA XR 650 L (RD06) 650 1998

HONDA XR 650 L (RD06) 650 1997

HONDA XR 650 L (RD06) 650 1996

HONDA XR 650 L (RD06) 650 1995

HONDA XR 650 L (RD06) 650 1994

HONDA XR 650 L (RD06) 650 1993