AP RACING sintered Front/Rear Brake Pads for HONDA CR 80, 85, YAMAHA YZ 80, 85, 125, 250, 360 and SUZUKI RM 125, 250 1986-2003

The AP RACING LMP184OR set of brake pads is designed for YAMAHA YZ 80, YZ 85, YZ 125, YZ 250, YZ 360, HONDA CR 80, CR 85 and SUZUKI RM 125, RM 250 from 1986 to 2003. The pads clamp the disc to slow the bike down. Off-road, they work in mud, water and sand, which wear them quickly: pads in good condition keep the braking powerful and easy to modulate.

Specifications

• Brand: AP RACING
• Manufacturer part number: LMP184OR
• EAN code: 5700757007035
• ECE R90 approved
• Compound: sintered metal
• Engine: 2-stroke

When to replace it?

• Friction material worn below the minimum thickness in the manual (often 1 to 2 mm), or wear groove gone.
• Metallic grinding noise when braking.
• Lever or pedal going further, brakes with less bite.

Check pad thickness before every ride, especially in muddy conditions. Never wait for metal-to-metal contact: it scores the disc within a few stops.

Fitting tips

1. Push the caliper pistons back while keeping an eye on the brake fluid level in the reservoir, which will rise.
2. Clean the caliper and the pad pin, and replace the pin if it's marked.
3. Fit the pads with their spring or clip, the right way round, then pump the lever or pedal until you get normal travel back.
4. Check the condition of the disc: a disc that's too thin or warped wears out new pads.
5. Bed in the pads with a dozen progressive stops before riding hard.

Why AP RACING?

AP Racing's LMP motorcycle pads are made in Europe, and the brand has undertaken ECE R90 homologation of all its friction materials that can be used on the road. For off-road, there's a sintered compound built to last in abrasive conditions and a sintered Racing compound for competition, with more bite and a good feel at the lever.

Spare parts and items to plan

• Brake disc : TRW · MOTO-MASTER
• Brake fluid : MOTUL 500 ml · MOTUL 5 L

Frequently asked questions

Sintered or organic?
Sintered (metallic) pads last longer and stay effective in mud and water: they're the benchmark for motocross and enduro. Organic pads are gentler on the disc and bite well from cold.

Should both sides be changed?
Always replace the complete set for a given caliper, and check the disc while you're at it.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CR 80 2002
HONDA CR 80 2001
HONDA CR 80 2000
HONDA CR 80 1999
HONDA CR 80 1998
HONDA CR 80 1997
HONDA CR 80 1996
HONDA CR 80 1995
HONDA CR 80 1994
HONDA CR 80 1993
HONDA CR 80 1992
HONDA CR 80 1991
HONDA CR 80 1990
HONDA CR 80 1989
HONDA CR 80 1988
HONDA CR 80 1987
HONDA CR 80 1986
HONDA CR 85 2003
SUZUKI RM 125 1988
SUZUKI RM 250 1988
SUZUKI RM 250 1987
YAMAHA YZ 80 1993
YAMAHA YZ 85 2002
YAMAHA YZ 125 1989
YAMAHA YZ 250 1989
YAMAHA YZ 360 1989