AP RACING Racing sintered Front/Rear Brake Pads for BETA, GAS GAS, APRILIA and KTM 1986-2009

The AP RACING LMP159ORR set of brake pads is designed for GAS GAS CONTACT 250, PAMPERA 125, PAMPERA 250, TX 200, TX 270, TX 320, BETA ALP 125, ALP 200, ALP 250, ALP 260, TECHNO 250, ZERO 260, KTM SX 60, SX 65 and APRILIA TX 240 from 1986 to 2009. The pads clamp the disc to slow the bike down. Off-road, they work in mud, water and sand, which wear them quickly: pads in good condition keep the braking powerful and easy to modulate.

Specifications

• Brand: AP RACING
• Manufacturer part number: LMP159ORR
• EAN code: 5700757009848
• Compound: sintered metal

When to replace it?

• Friction material worn below the minimum thickness in the manual (often 1 to 2 mm), or wear groove gone.
• Metallic grinding noise when braking.
• Lever or pedal going further, brakes with less bite.

Check pad thickness before every ride, especially in muddy conditions. Never wait for metal-to-metal contact: it scores the disc within a few stops.

Fitting tips

1. Push the caliper pistons back while keeping an eye on the brake fluid level in the reservoir, which will rise.
2. Clean the caliper and the pad pin, and replace the pin if it's marked.
3. Fit the pads with their spring or clip, the right way round, then pump the lever or pedal until you get normal travel back.
4. Check the condition of the disc: a disc that's too thin or warped wears out new pads.
5. Bed in the pads with a dozen progressive stops before riding hard.

Why AP RACING?

AP Racing's LMP motorcycle pads are made in Europe, and the brand has undertaken ECE R90 homologation of all its friction materials that can be used on the road. For off-road, there's a sintered compound built to last in abrasive conditions and a sintered Racing compound for competition, with more bite and a good feel at the lever.

Spare parts and items to plan

• Brake disc : GALFER DF677W · GALFER DF678WLL
• Brake fluid : MOTUL 500 ml · MOTUL 5 L

Frequently asked questions

Sintered or organic?
Sintered (metallic) pads last longer and stay effective in mud and water: they're the benchmark for motocross and enduro. Organic pads are gentler on the disc and bite well from cold.

Should both sides be changed?
Always replace the complete set for a given caliper, and check the disc while you're at it.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
APRILIA TX 240 1988
APRILIA TX 240 1987
APRILIA TX 240 1986
BETA ALP 125 2009
BETA ALP 125 2008
BETA ALP 125 2007
BETA ALP 125 2006
BETA ALP 125 2005
BETA ALP 125 2004
BETA ALP 125 2003
BETA ALP 125 2002
BETA ALP 125 2001
BETA ALP 125 2000
BETA ALP 125 1999
BETA ALP 200 2005
BETA ALP 200 2004
BETA ALP 200 2003
BETA ALP 200 2002
BETA ALP 200 2001
BETA ALP 200 2000
BETA ALP 250 2003
BETA ALP 250 2002
BETA ALP 250 2001
BETA ALP 250 2000
BETA ALP 250 1999
BETA ALP 250 1998
BETA ALP 250 1997
BETA ALP 260 1996
BETA TECHNO 250 1996
BETA ZERO 260 1991
GAS GAS CONTACT 250 1993
GAS GAS CONTACT 250 1992
GAS GAS PAMPERA 125 2003
GAS GAS PAMPERA 125 2002
GAS GAS PAMPERA 125 2001
GAS GAS PAMPERA 125 2000
GAS GAS PAMPERA 125 1999
GAS GAS PAMPERA 125 1998
GAS GAS PAMPERA 125 1997
GAS GAS PAMPERA 125 1996
GAS GAS PAMPERA 250 1999
GAS GAS PAMPERA 250 1998
GAS GAS PAMPERA 250 1997
GAS GAS PAMPERA 250 1996
GAS GAS TX 200 1998
GAS GAS TX 200 1997
GAS GAS TX 270 1998
GAS GAS TX 270 1997
GAS GAS TX 320 1999
GAS GAS TX 320 1998
GAS GAS TX 320 1997
KTM SX 60 1999
KTM SX 65 2001
KTM SX 65 2000