NG BRAKES Round Fixed Brake Disc for HONDA CR 80, CR 85 1985-2007

NG offers this brake disc for HONDA CR 80, CR 85 1985-2007. The disc is bolted to the wheel and turns with it. When you brake, the caliper squeezes the pads against the disc: the friction turns speed into heat and the wheel slows down.

Why replace your brake disc?

The benefits:

• Get back strong, steady braking, with no vibration in the lever or pedal.
• New pads last longer on a disc that is flat and the right thickness.
• Diameter and bolt holes made for your bike: it fits in place of the original disc.

When should you replace the brake disc on your HONDA CR 80?

Measure the thickness with a micrometer: below the minimum stamped on the disc, or if it is warped or cracked, it must be replaced.

Specifications and fitting tips

• Brake Disc Shape: Round
• Disc type: Fixed
• Vehicle-specific brake discs
• Available in standard, wave and floating designs
• Manufacturer part number: 748

Cross-Mania tip: Fit new pads with a new disc, degrease the braking surfaces and tighten the bolts with threadlocker to the specified torque. Bed the brakes in gradually.

Also needed with this part

• Brake pads : TECNIUM · BREMBO
• Brake fluid : MOTUL 1 L · LIQUI MOLY 500 ml

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CR 80 2002
HONDA CR 80 2001
HONDA CR 80 2000
HONDA CR 80 1999
HONDA CR 80 1998
HONDA CR 80 1997
HONDA CR 80 1996
HONDA CR 80 1995
HONDA CR 80 1994
HONDA CR 80 1993
HONDA CR 80 1992
HONDA CR 80 1991
HONDA CR 80 1990
HONDA CR 80 1989
HONDA CR 80 1988
HONDA CR 80 1987
HONDA CR 80 1986
HONDA CR 80 1985
HONDA CR 85 2007
HONDA CR 85 2006
HONDA CR 85 2005
HONDA CR 85 2004
HONDA CR 85 2003