NG BRAKES Round Fixed Brake Disc for HUSQVARNA CR 125, CR 250, WR 125, WR 250 1980-1993

NG offers this brake disc for HUSQVARNA CR 125, CR 250, WR 125, WR 250 1980-1993. The disc is bolted to the wheel and turns with it. When you brake, the caliper squeezes the pads against the disc: the friction turns speed into heat and the wheel slows down.

Why replace your brake disc?

The benefits:

• Get back strong, steady braking, with no vibration in the lever or pedal.
• New pads last longer on a disc that is flat and the right thickness.
• Diameter and bolt holes made for your bike: it fits in place of the original disc.

When should you replace the brake disc on your HUSQVARNA WR 125?

Measure the thickness with a micrometer: below the minimum stamped on the disc, or if it is warped or cracked, it must be replaced.

Specifications and fitting tips

• Brake Disc Shape: Round
• Disc type: Fixed
• Vehicle-specific brake discs
• Available in standard, wave and floating designs
• Manufacturer part number: 733

Cross-Mania tip: Fit new pads with a new disc, degrease the braking surfaces and tighten the bolts with threadlocker to the specified torque. Bed the brakes in gradually.

Also needed with this part

• Brake pads : GALFER · NISSIN
• Brake fluid : MOTUL 1 L · LIQUI MOLY 500 ml

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA CR 125 1991
HUSQVARNA CR 125 1990
HUSQVARNA CR 125 1989
HUSQVARNA CR 125 1988
HUSQVARNA CR 125 1987
HUSQVARNA CR 250 1991
HUSQVARNA CR 250 1990
HUSQVARNA CR 250 1989
HUSQVARNA CR 250 1988
HUSQVARNA CR 250 1987
HUSQVARNA WR 125 1991
HUSQVARNA WR 125 1990
HUSQVARNA WR 125 1989
HUSQVARNA WR 125 1988
HUSQVARNA WR 125 1987
HUSQVARNA WR 125 1986
HUSQVARNA WR 125 1985
HUSQVARNA WR 125 1984
HUSQVARNA WR 125 1983
HUSQVARNA WR 125 1982
HUSQVARNA WR 125 1981
HUSQVARNA WR 125 1980
HUSQVARNA WR 250 1993
HUSQVARNA WR 250 1992
HUSQVARNA WR 250 1991
HUSQVARNA WR 250 1990