NG BRAKES Round Fixed Brake Disc for HUSQVARNA CR 250, TC 610, TE 610, WR 250, WR 360 1992-1999

NG offers this brake disc for HUSQVARNA CR 250, TC 610, TE 610, WR 250, WR 360 1992-1999. The disc is bolted to the wheel and turns with it. When you brake, the caliper squeezes the pads against the disc: the friction turns speed into heat and the wheel slows down.

Why replace your brake disc?

The benefits:

• Get back strong, steady braking, with no vibration in the lever or pedal.
• New pads last longer on a disc that is flat and the right thickness.
• Diameter and bolt holes made for your bike: it fits in place of the original disc.

When should you replace the brake disc on your HUSQVARNA CR 250?

Measure the thickness with a micrometer: below the minimum stamped on the disc, or if it is warped or cracked, it must be replaced.

Specifications and fitting tips

• Brake Disc Shape: Round
• Disc type: Fixed
• Vehicle-specific brake discs
• Available in standard, wave and floating designs
• Manufacturer part number: 266

Cross-Mania tip: Fit new pads with a new disc, degrease the braking surfaces and tighten the bolts with threadlocker to the specified torque. Bed the brakes in gradually.

Also needed with this part

• Brake pads : GALFER FD138G1054 · GALFER FD075G1396
• Brake fluid : MOTUL 5 L · MOTUL

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA CR 250 1999
HUSQVARNA CR 250 1998
HUSQVARNA CR 250 1997
HUSQVARNA CR 250 1996
HUSQVARNA CR 250 1995
HUSQVARNA CR 250 1994
HUSQVARNA CR 250 1993
HUSQVARNA CR 250 1992
HUSQVARNA TC 610 1998
HUSQVARNA TC 610 1997
HUSQVARNA TC 610 1996
HUSQVARNA TE 610 1999
HUSQVARNA TE 610 LT 1999
HUSQVARNA WR 250 1999
HUSQVARNA WR 250 1998
HUSQVARNA WR 250 1997
HUSQVARNA WR 250 1996
HUSQVARNA WR 250 1995
HUSQVARNA WR 250 1994
HUSQVARNA WR 360 1999
HUSQVARNA WR 360 1998
HUSQVARNA WR 360 1997
HUSQVARNA WR 360 1996
HUSQVARNA WR 360 1995
HUSQVARNA WR 360 1994
HUSQVARNA WR 360 1993
HUSQVARNA WR 360 1992