NG BRAKES Wave Fixed Brake Disc for SHERCO SE 250, SE 250 I-F FACTORY, SE 250 I-R RACING, SER 300 2012-2016

NG offers this brake disc for SHERCO SE 250, SE 250 I-F FACTORY, SE 250 I-R RACING, SER 300 2012-2016. The disc is bolted to the wheel and turns with it. When you brake, the caliper squeezes the pads against the disc: the friction turns speed into heat and the wheel slows down.

Why replace your brake disc?

The benefits:

• Get back strong, steady braking, with no vibration in the lever or pedal.
• New pads last longer on a disc that is flat and the right thickness.
• Diameter and bolt holes made for your bike: it fits in place of the original disc.

When should you replace the brake disc on your SHERCO SER 300?

Measure the thickness with a micrometer: below the minimum stamped on the disc, or if it is warped or cracked, it must be replaced.

Specifications and fitting tips

• Brake Disc Shape: Petal
• Disc type: Fixed
• Vehicle-specific brake discs
• Available in standard, wave and floating designs
• Manufacturer part number: 263X

Cross-Mania tip: Fit new pads with a new disc, degrease the braking surfaces and tighten the bolts with threadlocker to the specified torque. Bed the brakes in gradually.

Also needed with this part

• Brake pads : SBS 671HF · SBS 671HS
• Brake fluid : MOTUL 500 ml 109452 · MOTUL 500 ml 101666

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
SHERCO SE 250 2013
SHERCO SE 250 2012
SHERCO SE 250 I-F FACTORY 2013
SHERCO SE 250 I-F FACTORY 2012
SHERCO SE 250 I-R RACING 2013
SHERCO SE 250 I-R RACING 2012
SHERCO SER 300 2016
SHERCO SER 300 2015
SHERCO SER 300 2014