• New
    ATHENA Crankshaft Bearing and Seal Kit for KTM, HUSQVARNA and GAS GAS 2024-2027
    ATHENA Crankshaft Bearing and Seal Kit for KTM, HUSQVARNA and GAS GAS 2024-2027

    ATHENA Crankshaft Bearing and Seal Kit for KTM, HUSQVARNA and GAS GAS 2024-2027

    Review (0)
    €96.90
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    The engine’s bearings and oil seals in one kit for a bottom-end rebuild.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

      ATHENA offers this engine bearing and seal kit for KTM, HUSQVARNA and GAS GAS 2024-2027. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the bearings on your GAS GAS MC 125?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Manufacturer part number: P400270444098

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EC 125 2025
      GAS GAS MC 125 2027
      GAS GAS MC 125 2026
      GAS GAS MC 125 2025
      GAS GAS MC 125 2024
      GAS GAS MC 150 2025
      HUSQVARNA TC 125 2027
      HUSQVARNA TC 125 2026
      HUSQVARNA TC 125 2025
      HUSQVARNA TC 125 2024
      HUSQVARNA TC 150 2027
      HUSQVARNA TC 150 2026
      HUSQVARNA TC 150 2025
      HUSQVARNA TC 150 2024
      HUSQVARNA TE 125 2027
      HUSQVARNA TE 125 2026
      HUSQVARNA TE 125 2025
      KTM EXC 150 2026
      KTM EXC 150 2025
      KTM EXC 150 2024
      KTM SX 125 2027
      KTM SX 125 2026
      KTM SX 125 2025
      KTM SX 125 2024
      KTM SX 150 2027
      KTM SX 150 2026
      KTM SX 150 2025
      KTM SX 150 2024
      KTM XC 125 2027
      KTM XC 125 2026
      KTM XC 125 2025
      KTM XC 125 2024
      KTM XCW 125 2027
      KTM XCW 125 2026
      KTM XCW 125 2025
      KTM XCW 150 2026
      KTM XCW 150 2025
      KTM XCW 150 2024

      ATHENA
      P400270444098
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Crankshaft Bearing and Seal Kit for KTM, HUSQVARNA and GAS GAS 2024-2027
      ATHENA Crankshaft Bearing and Seal Kit for KTM, HUSQVARNA and GAS GAS 2024-2027
      ATHENA Crankshaft Bearing and Seal Kit for KTM, HUSQVARNA and GAS GAS 2024-2027
      €96.90
      Tax Included