• New
    ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027
    ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027

    ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027

    Review (0)
    €61.90
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    The engine’s bearings and oil seals in one kit for a bottom-end rebuild.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

    Wishlist
    Write your review

      ATHENA offers this engine bearing and seal kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the bearings on your KTM SX 85?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Manufacturer part number: P400270444013

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 85 2027
      GAS GAS MC 85 2026
      GAS GAS MC 85 2025
      GAS GAS MC 85 2024
      GAS GAS MC 85 2023
      GAS GAS MC 85 2022
      GAS GAS MC 85 2021
      HUSQVARNA TC 85 2027
      HUSQVARNA TC 85 2026
      HUSQVARNA TC 85 2025
      HUSQVARNA TC 85 2024
      HUSQVARNA TC 85 2023
      HUSQVARNA TC 85 2022
      HUSQVARNA TC 85 2021
      HUSQVARNA TC 85 2020
      HUSQVARNA TC 85 2019
      HUSQVARNA TC 85 2018
      HUSQVARNA TC 85 2017
      HUSQVARNA TC 85 2016
      HUSQVARNA TC 85 2015
      HUSQVARNA TC 85 2014
      KTM SX 85 2027
      KTM SX 85 2026
      KTM SX 85 2025
      KTM SX 85 2024
      KTM SX 85 2023
      KTM SX 85 2022
      KTM SX 85 2021
      KTM SX 85 2020
      KTM SX 85 2019
      KTM SX 85 2018
      KTM SX 85 2017
      KTM SX 85 2016
      KTM SX 85 2015
      KTM SX 85 2014
      KTM SX 85 2013
      KTM SX 85 2012
      KTM SX 85 2011
      KTM SX 85 2010

      ATHENA
      P400270444013
      12 Items

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027
      ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027
      ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027
      ATHENA Crankshaft Bearing and Seal Kit for KTM SX 85, HUSQVARNA TC 85 and GAS GAS MC 85 2010-2027
      €61.90
      Tax Included