• New
    Wössner Crankshaft Bearing & Oil Seal Kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024
    Wössner Crankshaft Bearing & Oil Seal Kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024

    Wössner Crankshaft Bearing & Oil Seal Kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024

    Review (0)
    €29.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The engine’s bearings and oil seals in one kit for a bottom-end rebuild.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      WOSSNER offers this engine bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose WOSSNER?

      Wössner, the German company founded by a former racer, forges its own parts: design and manufacturing are controlled end to end.

      When should you replace the bearings?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      Recommended hours for a bottom-end rebuild (manufacturer recommendation for the KTM SX 50/65, Husqvarna TC 50/65 2017-2023):

      • Racing: every 80 h.
      • Leisure: no KTM figure; have the wear checked at every top-end rebuild.
      • KTM SX, Husqvarna TC, GASGAS MC 50/65 since 2024: racing: every 90 h.

      Specifications and fitting tips

      • Manufacturer part number: OSK428199

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 50 2024
      GAS GAS MC 50 2023
      GAS GAS MC 50 2022
      GAS GAS MC 50 2021
      HUSQVARNA TC 50 2024
      HUSQVARNA TC 50 2023
      HUSQVARNA TC 50 2022
      HUSQVARNA TC 50 2021
      HUSQVARNA TC 50 2020
      HUSQVARNA TC 50 2019
      HUSQVARNA TC 50 2018
      HUSQVARNA TC 50 2017
      HUSQVARNA TC 50 MINI 2024
      HUSQVARNA TC 50 MINI 2023
      HUSQVARNA TC 50 MINI 2022
      HUSQVARNA TC 50 MINI 2021
      HUSQVARNA TC 50 MINI 2020
      HUSQVARNA TC 50 MINI 2019
      HUSQVARNA TC 50 MINI 2018
      KTM SX 50 2023
      KTM SX 50 2022
      KTM SX 50 2021
      KTM SX 50 2020
      KTM SX 50 2019
      KTM SX 50 2018
      KTM SX 50 2017
      KTM SX 50 2016
      KTM SX 50 2015
      KTM SX 50 2014
      KTM SX 50 2013
      KTM SX 50 MINI 2023
      KTM SX 50 MINI 2022
      KTM SX 50 MINI 2021
      KTM SX 50 MINI 2020
      KTM SX 50 MINI 2019
      KTM SX 50 MINI 2018
      KTM SX 50 MINI 2017
      KTM SX 50 MINI 2016
      KTM SX 50 MINI 2015
      KTM SX 50 MINI 2014
      KTM SX 50 MINI 2013

      WOSSNER
      OSK428199

      Specific References

      No customer reviews for the moment.

      Write your review
      Wössner Crankshaft Bearing & Oil Seal Kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024
      WÖSSNER Crankshaft Bearing & Oil Seal Kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024
      Wössner Crankshaft Bearing & Oil Seal Kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50, TC 50 MINI and GAS GAS MC 50 2013-2024
      €29.90
      Tax Included