• New
    ATHENA Crankshaft Bearing and Seal Kit for GAS GAS EC 200, EC 250, EC 300 2008-2018
    ATHENA Crankshaft Bearing and Seal Kit for GAS GAS EC 200, EC 250, EC 300 2008-2018

    ATHENA Crankshaft Bearing and Seal Kit for GAS GAS EC 200, EC 250, EC 300 2008-2018

    Review (0)
    €85.90
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    The engine’s bearings and oil seals in one kit for a bottom-end rebuild.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

      ATHENA offers this engine bearing and seal kit for GAS GAS EC 200, EC 250, EC 300 2008-2018. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the bearings on your GAS GAS EC 250?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Manufacturer part number: P400155444012

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EC 200 2017
      GAS GAS EC 200 2016
      GAS GAS EC 200 2015
      GAS GAS EC 200 2014
      GAS GAS EC 200 2011
      GAS GAS EC 200 2010
      GAS GAS EC 200 2009
      GAS GAS EC 200 2008
      GAS GAS EC 250 2018
      GAS GAS EC 250 2017
      GAS GAS EC 250 2016
      GAS GAS EC 250 2015
      GAS GAS EC 250 2014
      GAS GAS EC 250 2013
      GAS GAS EC 250 2012
      GAS GAS EC 250 2011
      GAS GAS EC 250 2010
      GAS GAS EC 250 2009
      GAS GAS EC 250 2008
      GAS GAS EC 300 2018
      GAS GAS EC 300 2017
      GAS GAS EC 300 2016
      GAS GAS EC 300 2015
      GAS GAS EC 300 2014
      GAS GAS EC 300 2013
      GAS GAS EC 300 2012
      GAS GAS EC 300 2011
      GAS GAS EC 300 2010
      GAS GAS EC 300 2009
      GAS GAS EC 300 2008

      ATHENA
      P400155444012
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Crankshaft Bearing and Seal Kit for GAS GAS EC 200, EC 250, EC 300 2008-2018
      ATHENA Crankshaft Bearing and Seal Kit for GAS GAS EC 200, EC 250, EC 300 2008-2018
      ATHENA Crankshaft Bearing and Seal Kit for GAS GAS EC 200, EC 250, EC 300 2008-2018
      €85.90
      Tax Included