• New
    ATHENA Crankshaft Bearing and Seal Kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024
    ATHENA Crankshaft Bearing and Seal Kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024

    ATHENA Crankshaft Bearing and Seal Kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024

    Review (0)
    €16.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    The engine’s bearings and oil seals in one kit for a bottom-end rebuild.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      ATHENA offers this engine bearing and seal kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the bearings on your BETA RR 50?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Manufacturer part number: P4E0010444001

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      APRILIA MX 50 2004
      APRILIA MX 50 2003
      APRILIA MX 50 2002
      APRILIA RX 50 2004
      APRILIA RX 50 2003
      APRILIA RX 50 2002
      APRILIA RX 50 2001
      APRILIA RX 50 2000
      APRILIA RX 50 1999
      APRILIA RX 50 1998
      APRILIA RX 50 1997
      APRILIA RX 50 1996
      APRILIA RX 50 1995
      BETA RR 50 2024
      BETA RR 50 2023
      BETA RR 50 2022
      BETA RR 50 2021
      BETA RR 50 2020
      BETA RR 50 2019
      BETA RR 50 2018
      BETA RR 50 2017
      BETA RR 50 2016
      BETA RR 50 2015
      BETA RR 50 2014
      BETA RR 50 2013
      BETA RR 50 2012
      BETA RR 50 2011
      BETA RR 50 2010
      BETA RR 50 2009
      BETA RR 50 2008
      BETA RR 50 2007
      BETA RR 50 2006
      BETA RR 50 2005
      BETA RR 50 2004
      BETA RR 50 2003
      BETA RR 50 2002
      BETA RR 50 2001
      BETA RR 50 2000
      BETA RR 50 1999
      BETA RR 50 1998
      RIEJU MRT 50 2024
      RIEJU MRT 50 2023
      RIEJU MRT 50 2022
      RIEJU MRT 50 2021
      RIEJU MRT 50 2020
      RIEJU MRT 50 2019
      RIEJU MRT 50 2018
      RIEJU MRT 50 2017
      RIEJU MRT 50 2016
      RIEJU MRT 50 2015
      RIEJU MRT 50 2014
      RIEJU MRT 50 2013
      RIEJU MRT 50 2012
      RIEJU MRT 50 2011
      RIEJU MRT 50 2010
      RIEJU MRT 50 2009

      ATHENA
      P4E0010444001
      12 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Crankshaft Bearing and Seal Kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024
      ATHENA Crankshaft Bearing and Seal Kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024
      ATHENA Crankshaft Bearing and Seal Kit for BETA RR 50, RIEJU MRT 50 and APRILIA MX 50, RX 50 1995-2024
      €16.90
      Tax Included