• New
    PIVOT WORKS Upper A-Arm Bearing Kit for SUZUKI LT 230 1985-1987
    PIVOT WORKS Upper A-Arm Bearing Kit for SUZUKI LT 230 1985-1987

    PIVOT WORKS Upper A-Arm Bearing Kit for SUZUKI LT 230 1985-1987

    Review (0)
    €107.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The A-arm repair kit replaces the bushings and bearings of the quad's suspension arms: no more play, precise steering.

    PIVOT WORKS A-arm bearing kit for SUZUKI LT 230 from 1985 to 1987.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      On SUZUKI LT 230 from 1985 to 1987, the PIVOT WORKS PWAAKS01022U A-arm bearing kit fits in place of the original part. On a quad, the A-arms carry the front wheels and pivot on the frame through bushings or bearings. With play, the steering gets vague and the tyres wear unevenly: this kit rebuilds the A-arm pivot.

      Specifications

      • Brand: PIVOT WORKS
      • Manufacturer part number: PWAAKS01022U

      When to replace it?

      • Play in the front wheel, quad on stands.
      • Vague steering, knocking over bumps.
      • Marked bushings or bearings, torn seals on teardown.

      Your bike's service manual gives the exact interval. As a Cross-Mania guideline: strip, clean and grease every 20 to 30 hours of racing or after very muddy rides, once a season for leisure riding; replace as soon as play or a tight spot appears.

      Fitting tips

      1. Note the position of each part as you strip it, side by side.
      2. Press the needle bearings out, or use a suitable puller, without making the bores oval.
      3. Press the new bearings in squarely, to the same depth as the old ones.
      4. Pack bearings, bushings and seal lips with grease before reassembly.
      5. Tighten the bolts to the manufacturer's torque and check that the suspension moves freely, without play.

      Why PIVOT WORKS?

      Pivot Works specialises in chassis rebuild kits for off-road bikes and quads: bearings, seals, bushings and spacers grouped by model. The brand claims original-equipment quality, durability and fit, and since 2012 has offered a lifetime replacement of its kits in case of failure (once per kit).

      Spare parts and items to plan

      Frequently asked questions

      Are the bolts supplied?
      The kit contains the model's bearings, seals and wear bushings; the bolts and hardware stay original if they are not marked. Compare with the photo if in doubt.

      Which grease should I use?
      A thick, water-resistant grease, applied generously: it protects the needles from mud.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      SUZUKI LT 230 1987
      SUZUKI LT 230 1986
      SUZUKI LT 230 1985

      PIVOT WORKS
      PWAAKS01022U

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      PIVOT WORKS Upper A-Arm Bearing Kit for SUZUKI LT 230 1985-1987
      PIVOT WORKS Upper A-Arm Bearing Kit for SUZUKI LT 230 1985-1987
      PIVOT WORKS Upper A-Arm Bearing Kit for SUZUKI LT 230 1985-1987
      €107.90
      Tax Included