• New
    PIVOT WORKS Lower A-Arm Bearing Kit ref. PWAAKP03000L for POLARIS RZR 800 2014
    PIVOT WORKS Lower A-Arm Bearing Kit ref. PWAAKP03000L for POLARIS RZR 800 2014

    PIVOT WORKS Lower A-Arm Bearing Kit ref. PWAAKP03000L for POLARIS RZR 800 2014

    Review (0)
    €125.77
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The A-arm repair kit replaces the bushings and bearings of the quad's suspension arms: no more play, precise steering.

    PIVOT WORKS A-arm bearing kit for POLARIS RZR 800 2014.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      The PIVOT WORKS PWAAKP03000L A-arm bearing kit is designed for POLARIS RZR 800 2014. The needle bearings and bushings of the A-arms work every time the suspension compresses, in the middle of water and mud. Worn or seized, they make the suspension harsh and vague and end up wearing the bolts. This kit brings together the bearings, seals and bushings needed for the rebuild.

      Specifications

      • Brand: PIVOT WORKS
      • Manufacturer part number: PWAAKP03000L

      When to replace it?

      • Play in the front wheel, quad on stands.
      • Vague steering, knocking over bumps.
      • Marked bushings or bearings, torn seals on teardown.

      Your bike's service manual gives the exact interval. As a Cross-Mania guideline: strip, clean and grease every 20 to 30 hours of racing or after very muddy rides, once a season for leisure riding; replace as soon as play or a tight spot appears.

      Fitting tips

      1. Note the position of each part as you strip it, side by side.
      2. Press the needle bearings out, or use a suitable puller, without making the bores oval.
      3. Press the new bearings in squarely, to the same depth as the old ones.
      4. Pack bearings, bushings and seal lips with grease before reassembly.
      5. Tighten the bolts to the manufacturer's torque and check that the suspension moves freely, without play.

      Why PIVOT WORKS?

      Pivot Works specialises in chassis rebuild kits for off-road bikes and quads: bearings, seals, bushings and spacers grouped by model. The brand claims original-equipment quality, durability and fit, and since 2012 has offered a lifetime replacement of its kits in case of failure (once per kit).

      Spare parts and items to plan

      Frequently asked questions

      Are the bolts supplied?
      The kit contains the model's bearings, seals and wear bushings; the bolts and hardware stay original if they are not marked. Compare with the photo if in doubt.

      Which grease should I use?
      A thick, water-resistant grease, applied generously: it protects the needles from mud.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      POLARIS RZR 800 2014

      PIVOT WORKS
      PWAAKP03000L

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      PIVOT WORKS Lower A-Arm Bearing Kit ref. PWAAKP03000L for POLARIS RZR 800 2014
      PIVOT WORKS Lower A-Arm Bearing Kit ref. PWAAKP03000L for POLARIS RZR 800 2014
      PIVOT WORKS Lower A-Arm Bearing Kit ref. PWAAKP03000L for POLARIS RZR 800 2014
      €125.77
      Tax Included