• New
    Lower a-arm bearing KIT for -06 and -06 PIVOT WORKS for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018
    Lower a-arm bearing KIT for -06 and -06 PIVOT WORKS for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018

    Lower a-arm bearing KIT for -06 and -06 PIVOT WORKS for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018

    Review (0)
    €129.90
    Tax Included
    Last items in stock

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Last items in stock

      PIVOT WORKS offers this engine bearing for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PIVOT WORKS?

      Pivot Works kits, sold by the American All Balls Racing group, use hardened NTN, NSK or Koyo bearings from original-equipment bearing suppliers, supplied pre-greased with their seals; every kit carries the Pivot Works limited lifetime warranty.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Manufacturer part number: PWAAK-S06-400L

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KFX 400 2006
      KAWASAKI KFX 400 2005
      KAWASAKI KFX 400 2004
      KAWASAKI KFX 400 2003
      SUZUKI LTZ 400 2018
      SUZUKI LTZ 400 2017
      SUZUKI LTZ 400 2016
      SUZUKI LTZ 400 2015
      SUZUKI LTZ 400 2014
      SUZUKI LTZ 400 2013
      SUZUKI LTZ 400 2012
      SUZUKI LTZ 400 2011
      SUZUKI LTZ 400 2010
      SUZUKI LTZ 400 2009
      SUZUKI LTZ 400 2008
      SUZUKI LTZ 400 2007
      SUZUKI LTZ 400 2006
      SUZUKI LTZ 400 2005
      SUZUKI LTZ 400 2004
      SUZUKI LTZ 400 2003

      PIVOT WORKS
      PWAAK-S06-400L
      2 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      Lower a-arm bearing KIT for -06 and -06 PIVOT WORKS for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018
      Lower a-arm bearing KIT for -06 and -06 PIVOT WORKS for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018
      Lower a-arm bearing KIT for -06 and -06 PIVOT WORKS for SUZUKI LTZ 400 and KAWASAKI KFX 400 2003-2018
      €129.90
      Tax Included