Motocross tyre KENDA K7102F WASHOUGAL III 60/100-10 (2.50-10) NHS 33J TT STICKY front

KENDA offers this motocross tyre. A motocross tyre grips thanks to its knobs, blocks of rubber that dig into the dirt to drive, brake and turn the bike.

Why choose a tyre suited to your ground?

The benefits:

• More drive in the slop: a soft-terrain tyre (mud, sand, loose dirt) has tall, widely spaced knobs that bite and shed the mud, but it wears quickly on hard ground.
• More grip and longer life on dry ground: a hard-terrain tyre has lower, more closely spaced knobs, but it clogs up faster in mud.
• An intermediate tyre is the most versatile compromise: the right choice if you ride on varied ground.

Why choose KENDA?

KENDA is a Taiwanese manufacturer of tyres and inner tubes.

When should you replace the tyre?

Rounded, split or torn knobs, or cracked or cut sidewalls: it needs replacing. In racing, it is changed as soon as the knob edges are no longer sharp; for leisure riding, at the latest when the knobs have lost about half their height. The rear wears faster than the front, and a tyre stored for several years hardens, even if it has never been ridden.

Specifications and fitting tips

• Size: 60/100-10: 60 mm wide, sidewall height 100% of the width, 10-inch rim, front
• Load and speed: load 33 (115 kg max per tyre), speed J < 100 km/h
• Fitting: with an inner tube or mousse (TT), bias (X-Ply)
• Approval: NHS, off-road use only
• Sticky rubber compound for high traction
• Specifically developed carcass for lighter, more responsive feel
• Manufacturer part number: 1R231058

Cross-Mania tip: Follow the rotation arrow on the sidewall, fit it with mounting paste and a new inner tube (or a mousse), then set the pressure cold.

Also needed with this part

• Inner tube : MICHELIN · KENDA
• Tyre fitting and repair : KITE 20.762.0.BL · KITE 20.761.0.BL

Compatibility

Choose the same size as the original tyre: it is moulded on the sidewall of your current tyre and given in the bike's manual.